MG5600GP/AP Series Pressure Transmitter

Technical Parameters

General Specifications

Electric

Ambient

Machinery

AccuracyGP:
Range Code 1-3: (Range down ratio ≤5) accuracy ±0.04%
Range Code 1-3: (Range down ratio ＞5) accuracy ±【0.015+0.005(URL/range】% range
Range Code 4-7: (Range down ratio ≤5) accuracy ±0.05%
Range Code 4-7: (Range down ratio ＞5) accuracy ±【0.025+0.005(URL/range】% range
AP:
Full span:(Range down ratio ≤5) accuracy ±0.05%
Full span: (Range down ratio ＞5) accuracy ±【0.025+0.005(URL/range】% range
Long Term StabilityAnnual drift less than ± 0.05%, long-term drift less than ± 0.1%/10 years, long-term drift less than ± 0.2%/15 years
Process Temperature-40℃~150℃
Ambient Temperature-40℃~85℃
Measurement Range0~700bar(0~70MPa)
Max. Overpressure Limit0~1000bar(0~100MPa)
Ingress ProtectionIP66/IP67
Response Time90ms
Explosion Proof Intrinsically Safe Ex ia IIC T6
Explosion-proof Ex d IIC T6
Output Signal4~20mA+HART, PROFIBUS PA, FF, Wireless HART
CertificatesATEX, FM, NEPSI,SIL

Output Signal2-wire 4～20mA DC, HART
Input Voltage10.5～45V DC
Voltage of Intrinsically Safe Circuit10.5～26V DC
Loading Resistance250～600Ω(24V DC,including cables and resistors)
Load CapacitanceLess than 0.55mF
Load InductanceLess than 3.3mH
Interval of Power LinesMore than 150mm（Please Avoid Parallel Wiring）
Saturation CurrentUpper Limit 20.8mA，Lower Limit 3.8mA
Alarm CurrentUpper Limit 20.8mA，Lower Limit 3.8mA (Mode Adjustable）
Adjust FunctionZero and full-span points can be adjusted locally by the three buttons or be configured remotely
Output ModeLinear output, square root output (can be remotely adjusted through configuration software)

Ambient Temperature-40～185℉(-40～85℃ )
Fluorine oil -40～140℉(-40～60℃ )
Storage Temperature-40～194℉(-40～90℃ )
Process Temperature-40～302℉(-40～150℃）
Weather Resistance Measurement PerformanceProducts comply with DIN40040GPC. The main circuit boards are treated with triple-proof paint and the sensor circuits are sealed with adhesive
Power Supply Influence
±0.005％/1V
Ambient Temperature Influence±（0.05％ of span +0.09％ of upper limit）
Static Pressure Influence±(0.025% of range+0.05% of span)/3.4MPa
Unidirectional static pressure of 32MPa is maintained for 1 minute, and the pressure is released to restore the venting state, with a zero point change of less than 0.1% FS
Bidirectional static pressure of 32MPa continues for 1 minute, then the pressure is released and restored to the venting state. The zero point change is less than 0.1% FS
Response Time90ms
Damping TimeThe time constant can be adjusted within 0-32.0 seconds

Diaphragm MaterialSS316L, Hastelloy, Tantalum, Gold Plated Stainless Steel, coating with PTFE, etc.
Wetted Sealing RingFluorine Rubber, Nitrile Rubber
Wetted Body MaterialSS316L, Hastelloy, Tantalum, Montessori Alloy, etc.
Filling OilSilicone oil, high-temperature silicone oil, vegetable oil, fluorine oil, and others (depending on customer application)
Process Connection1/4"-18 NPT, 1/2"-14 NPT
Product Weight2.6～3.2kg
Installation Location ImpactThe change in installation position parallel to the diaphragm will not cause zero drift effects. If the installation position changes by more than 90° from the diaphragm, zero drift within the range of 0.4kPa can be corrected by zero adjustment.
Allow Load Resistance0～600Ω（24VDC hour）Note: When communicating with a handheld communicator, a standard (2500) load resistance is required
Communication Line ConditionsLine length, up to 2000mm
(0.75~1.25mm²)
(When the cable for control instruments exceeds 1000mm, use twisted pair cable)
Ingress ProtectionIP66/IP67
EMCIf installed in a metal container or stationary pipe, in accordance with the revised clause A1 of EN61326-1 (1997) specifically for use in the workplace.