MG8750 Series Ultrasonic Level Transmitter

Technical Parameters

General Specifications

ProductMG8750 Series Ultrasonic Level Transmitter
ParameterLiquid level/Interface, Solid Level
Housing StructureSingle Chamber
Housing MaterialHigh pressure cast aluminum or stainless steel
Launch Angle5°~12°（The size of the emission angle is proportional to the ranging capability）
Cable Entry1/2"NPT or M20×1.5
Installation ModeTop mounted(Mounting with thread, flange, bracket)
Input Voltage24VDC or 220VAC with polarity reversal protection
Output Signal2-wire 4～20mA DC,HART
Damping0.2～36 seconds
Lightning ProtectionEN61000－4－4(GB/T17626.4) Severity Level 4
EN61000－4－5(GB/T17626.2) Severity Level 4
Process Display4～20mA, percentage, program unit
Input Unitft, in, m, cm, mm
Measurement Range0～2362"(0～30m)
Operation Temperature-40～158℉(-40～100℃)
Ambient Temperature-40～158℉(-40～80℃)
Storage Temperature-40～158℉(-40～80℃)
Humidity0~100％ Relative humidity
Process Pressure Measurement Performance0～3bar（0～0.3MPa)
Accuracy±0.2%
Environmental Temperature InfluenceThe error caused by every 1 ℃ change is less than 0.01% of the measurement distance
ResolutionWhen the measurement distance＜10m：1mm
When the measurement distance≥10m：10mm
Blind0.25～1.0m，the size of the blind spot is proportional to the distance measurement capability
Probe MaterialStandard Type: Nylon
Corrosion Resistant Type: PVDF、PTFE
Low-Temperature Resistance Type: Equiped with automatic defrosting function, suitable for use in cold northern regions, which can prevent the probe from frosting and unable to measure normally
Outline DimensionFor details, please download the product datasheet (page 8)
FlangeFor details, please download the product datasheet
ThreadG2A, M82×2, M45×1.5
SealingFactory sealing
Ingress ProtectionIP67/IP68
EMCIf installed in a metal container or stationary pipe, in accordance with EN 61326-1 (1997), the revised provisions specifically for Class A1A equipment used in the workplace
Explosion proofCEX CEI Intrinsically safe