MG8610 Series RF Admittance Level Switch

Technical Parameters

General Specifications

ProductMG8610I RF Admittance Level Switch(Insulatedprobe, usedfor corrosive medium)
MG8610N RF Admittance Level Switch(Nakedprobe)
MG8610H RF Admittance Level Switch(Nakedprobe, usedfor high-temperature conditions)
Measurement ParametersLiquid level, material level (flakes, powders, particles)
Housing StructureSingle Chamber
Housing MaterialHigh pressure cast aluminum or stainless steel
Dielectric Constant≥2
Medium Viscosity≤0.4Pa·S
Cable Entry3/4"NPT
Material316LSST, 304SST, 316SST, Titanium, 304LSST, Tantalum, Zirconium 702 Alloy, Hastelloy C-276, 600 Alloy, 400 Alloy, 201 Nickel, 20 Alloy, Hastelloy C-22, 2507 duplex SST, PTFE lining
Output Voltage24VDC or 220VAC, with polarity reversal protection
Output SignalRelay 2-set normally open and normally closed contact switch output (contact capacity 220VAC 5A 24V DC 5A)
2-wire system: 8mA normal, 16mA alarm current switch output
Damping2 Seconds
Power Consumption1W
Lightning ProtectionEN61000－4－4(GB/T17626.4) Severity 4
EN61000－4－5(GB/T17626.2) Severity 4
Operation TemperatureMG8610I -112～446℉(-80～230℃)
MG8610N -112～662℉(-80～350℃)
MG8610H -112～851℉(-80～455℃)
Ambient Temperature-40～176℉(-40～80℃)
Storage Temperature-40～176℉(-40～80℃)
Humidity0~100％ Relative humidity
Operation Pressure0~63bar(0~6.3MPa)
AccurracyConductive material ± 2mm, insulating material ± 20mm
Ambient Temperature InfluenceThe error caused by every 1 ℃ change is less than 0.01% of the measurement distance
Process DisplayLED red/blue indication
ProbeProbe Length：probe rod outer diameter 0.3 "(8mm), length 3.9" to 118 "(100 to 3000mm)
Wetted Part Material316LSST, 304SST, PTFE, 316SST, Titanium, Hastelloy C-276, Montessori Alloy, Graphite Material, etc
Outline DimensionsFor details, please download the product selection sample (page 10)
FlangeFor details, please download the product selection sample (pages P14 to P15)
Thread1"NPT
Sealing Factory sealing
Ingress ProtectionIP67/IP68
EMCIf the probe is installed in a metal container or stationary tube, in accordance with EN61326-1 (1997), the revised provisions specifically for Class A1A equipment in the workplace