MG9500 Series Electromagnetic Flowmeter

Product > FLOW > MG9500 Series Electromagnetic Flowmeter

MG9500 Series Electromagnetic Flowmeter

MG9500 Series Electromagnetic Flowmeter is an extremely versatile flow meter, developed based on Faraday's electromagnetic induction principle as an intelligent flowmeter.

Learn more

Technical Parameters

General Specifications

ProductMG9500 Series Electromagnetic Flowmeter
MediumLiquid, slurry (conductivity must be at least 5 microsiemens/cm (5 μ s/cm) or higher)
Housing StructureDual-Chamber
Housing MaterialHigh pressure cast aluminum or stainless steel
Body MaterialCarbon steel or stainless steel
Medium Viscosity0~100pa.s
Cable Entry1/2"NPT or M20×1.5
Electrode Material316L, Hastelloy, Platinum Iridium Alloy, Titanium, Tantalum, Tungsten Carbide
Power Supply24VDC/220VAC/Lithium battery
Output SignalCurrent, Pulse, Frequency, Alarm
HART, Modbus, GPRS, PROFIBUS-DP, PROFIBUS-PA
Measurement AccuracyPipeline type ±0.2%, ±0.5%(Standard), ±1.0%
Insertion type ±2.5%
Repeatability±0.1% of measured value
Process Temperature＜160℃
Ambient Temperature-40~176℉(-40~85℃)
Humidity0~100％ Relative humidity
Process Pressure0~42MPa(Please consult the factory for ultra-high Pressure）
Measurement AccuracyPipeline type ±0.2%, ±0.5%(Standard), ±1.0%
Insertion type ±2.5%
Repeatability±0.1% of measured value
Sensor SealingGraphite gasket, others
Pressure RatingsPN1.6MPa~42MPa, ANSI 150~2500LB
StructureInsertion type ≥DN200
Flange type DN10~2000
Chuck type DN10~100
Thead type DN10~100
DiameterDN10~2000 3/8"~80"(For ultra large diameter, please consult the factory）
Flange MaterialCarbon steel, Stainless Steel(SS304, SS316）, RF, RJ, MFM
SealingFactory sealing
Ingress ProtectionIP65/IP67/IP68
liningRubber, PTFE, F46、PFA
CertificatesEXd ia IIC T6 Gb
SIL