MG9300 Series Wedge Flowmeter



Product > FLOW > MG9300 Series Wedge Flowmeter

MG9300 Series Wedge Flowmeter

MG9300 series wedge flowmeter throttling element is composed of a V-shaped wedge block, flange, and pipeline.

Learn more

Overview Parameters Data Preview Attachments

Technical Parameters

General Specifications

AccuracyBetter than ± 1% of reading (calibration)
Repeatability±0.2% of reading
Pressure LossAbout 1/5 of the measured differential pressure (about 1/3 of the orifice plate)
MediumVarious liquids, gases, and vapors, especially suitable for slurry fluids, wastewater, fuel oil, residual oil, and heavy oil, etc
Reynolds Number Applicable Range500～1×106（When measured at low Reynolds numbers, the range is relatively reduced and the uncertainty of the outflow coefficient is relatively increased）
Minimum Liquid Viscosity500mPa.s
Process Pressure ResistanceBelow 5MPa（For higher pressure, please consult the factory)
Process Temperature ResistanceBelow 400°C（For higher temperature, please consult the factory）
Applicable Pipeline DiameterDN15mm～DN300mm (For larger diameter, please consult the factory）
Wedge RatioH/D：0.2,0.3,0.4,0.5
Long Term Stability±0.2%F.S/Y



MG9300 Series Wedge Flowmeter

微信扫一扫即可获取相关产品资料

MG9300 Series Wedge Flowmeter Datasheet
MG9300 Series Product Manual
Installation Manual